|
GC
Injector Overview (12 types)
|
58
|
TWELVE
INJECTOR TYPES TO CHOOSE FROM
Twelve
injector types are available for installation on SRI gas chromatographs.
Up to five injectors may be mounted simultaneously on the Model 8610C
or 8610D. The Model 410
can mount a gas sampling valve in addition
to the On-column injector which may be upgraded.
The Model 310 will accommodate a single On-column,
Heated Flash Vaporization, Heated
Split/Splitless or PTV injector. Injector
types are selected by the user depending on the particular measurement
application, detection limit and regulatory requirements. The On-column
injector is standard equipment on every 8610, 410 and 310 GC. Heated Flash
Vaporization, Heated Split/Splitless and PTV injectors are all upgrades
to the On-column injector. All injectors must be installed at the SRI
factory.
 This particular 8610C GC model is equipped with a Thermal Desorber, a Method 5030/5035 Purge & Trap and a standard on-column injector. |
|
||||||||||||||||||||||||||||||||||||||
|
Sample
Types and Appropriate Injectors
|
|
| LIQUIDS: | On-Column, Heated Flash Vaporization, Heated Split/Splitless, PTV, Heated Static Headspace, Purge & Trap, Liquid Injection Valve, Liquid Autosamplers or Headspace Autosampler |
| SOLIDS: | Thermal Desorber, Heated Static Headspace, PTV, Method 5035 Purge & Trap or Headspace Autosampler |
| GASES: | On-Column, Gas Sampling Valve, Method TO-14 Air Concentrator or Heated Static Headspace |
| SPME FIBERS: | Heated Flash Vaporization with Low Volume SPME Liner or Heated Split/Splitless |
58